RFMCO reps Camus in Las Vegas, offering gas-fired, high efficiency copper tube and stainless-steel boilers for commercial & industrial facilities
RFMCO stocks a small inventory of boilers and water heaters at our Las Vegas warehouse for quick delivery to our local customers, including pre-packaged, hydronics skids, which offer end users an alternative to traditional boiler system designs and plug-in, on-site installation. For hydronic boiler training in Las Vegas, view our training schedule at rfmacdonald.com/training.
Electric Boilers
Amptron Electric Boiler
The Amptron Series is a fully electric boiler for hydronic heating commercial applications. The Camus Amptron Electric boiler is a zero-emissions product that does not produce any greenhouse gases or pollutants, making it a smart choice for the environment and the future.
Standard Features
• Optional PLC and HMI with integrated power monitoring module
• Optional SCR (Silicone Controlled Rectifier) for infinite modulation
• Vertical heat exchanger with heating elements that are easily replaceable
• Heating element bundles with spyders to ensure no element hot spots
• A novel baffle design which
o Increases water velocity along the heating elements for element longevity
o Ensures even flow around elements for even tank temperature
Firetube Boilers
Avenger Series
The Avenger Series is a two-pass counter flow fire tube commercial boiler for hydronic heating applications. It features thermal efficiencies of up to 98% and turndown ratios of up to 40:1.
Standard Features
• Models 1,000 up to 6,000 MBH
• 160 PSI working pressure
• Fully welded stainless-steel pressure vessel, tubes, tubesheets & combustion chamber
• Modulating burner with up to 40:1 turn-down
• ASME “H” and “HLW” stamped heat exchanger
• Operating pressure as low as 12 PSI
• Natural or propane gas operation
Valiant-FT Series I
The Valiant-FT Series I is a counter flow firetube boiler for hydronic heating applications. It features thermal efficiencies of up to 97% and turndown ratios of up to 10:1. This boiler can be floor mounted or wall hung. Energy star rated for models.
Standard Features
• Models range from 80,000 BTU/hr up to 399,000 BTU/hr
• ASME “H” stamped stainless steel heat exchanger
• Fully welded stainless steel pressure vessel combustion chamber, tubes & tubesheets
• 95% DOE AFUE efficiency (models 80-299)
• 97% thermal efficiency (model 399)
• NG or LP operation (field convertible)
• Standard wall-hung configuration (optional kit for floor-mount configuration)
• Inherent O2 trim via air density response
• Zero clearances to combustible materials
• Built-in high limit and low water cut-off with soft manual reset through touchscreen
• Universal vent connection with combustion analyzer test port
• Return water temperatures as low as 40°F
• Factory test-fired and certified
Valiant-FT Series II
Standard Features
• Capable of up to 99.4% Thermal Efficiency and up to 99.2% Combustion Efficiency
• Available in a broad capacity range, with inputs from 400 to 850 KBtu/h
• Fully condensing vertical cylindrical counter-flow firetube design heat exchanger
• Stainless steel all-welded design allows constant return temperatures as low as 40F°
• 10:1 gas input turn-down with sustained combustion throughout the entire range
• Category II & IV venting
• Factory fire-tested for optimum combustion and establish certified gas input rates
• Safety and operating devices fully configured, calibrated and factory tested
• Complies with energy efficiency requirements of the latest ASHRAE 90.1 Standard
• Certified by CSA to the Requirements of ANSI Z21.13, And CSA 4.9
Watertube Boilers
BlueFlame Series
The BlueFlame is an atmospheric boiler for hydronic heating or hot water supply for commercial and industrial applications delivering thermal efficiencies of up to 83%.
Standard Features
• Diagnostic lights help troubleshoot over the phone
• Optional digital temperature control reduces standby losses
• Adaptable to outdoor use
• Slide out stainless steel burner tray
• Slide out copper tube heat exchanger
• Easy side access for inspection of combustion chamber
• High temperature ceramic fiber tiles in combustion chamber
• Very smooth and quiet operation
• Venting in low ceiling applications with power venter & low profile hood efficiencies up to 83%
• Optional modulating firing mode available
DynaFlame Series
The DynaFlame is our leading-edge product with models ranging from 500,000 BTU to 6 million BTU. All models are available in non-condensing, near-condensing or fully condensing modes. The primary heat exchanger is available in a choice of copper/cu-ni or stainless steel.
Standard Features
• Models range from 500,000 BTU/hr up to 6 million BTU/hr
• Single point input adjustment for controlling air and gas
• 1 to 1 air/gas ratio for perfect modulation throughout
• Advanced digital control system with pinpoint accuracy
• Proven hot surface ignition with soft start, rumble free operation
• 4-20mA for setpoint or modulation control
• Proven pilot ignition on models 3 million BTU/hr and above
• 0-10 VDC converter (must be specified)
• Lead lag capability up to 8 boilers
• DHW sensor (domestic only) and system sensor (heating only)
• Modbus RTU communication
• Direct ignition up to 2.5 million BTU/hr
• Stainless steel secondary heat exchanger for condensing models
Flow switch, pressure relief valve, low gas pressure switch and flame failure contacts are standard on every DynaFlame
Dynaforce Series
The fully modulating Dynaforce has an efficiency rating of up to 99% and features a vertical cylindrical heat exchanger which is constructed entirely of stainless steel. The Dynaforce can be fired with either natural gas or propane. Models range from 600,000 BTU up to 5 million BTU with a turndown ratio of up to 5:1.
Standard Features
• 5:1 turndown ratio with a minimum 20% firing rate
• Single point adjustment for controlling air and gas
• 1 to 1 air/gas ratio for perfect modulation throughout
• Advanced integrated Honeywell SOLA control with touch screen interface
• Cascade up to 8 individual appliances in daisy-chain formation
• Main burner test firing valve
• Proven pilot ignition on models above 3 million BTU/hr
• Direct ignition up to 2.5 million BTU/hr
• Return water temperatures down to 40°F
• Inlet regulator for incoming gas pressures up to 14″ w.c.
• Flue temperature monitoring
• Modbus RTU communication
Flow switch, pressure relief valve, low gas pressure switch and flame failure contacts are standard on every Dynaforce.
DynaMax Series
The DynaMax is a gas fired condensing boiler with up to 97% efficiency. Developed for residential and commercial applications, and available in floor or wall mount.
Performance Highlights
• Up to 97% efficiency
• Approved plastic venting up to 100 feet
• Up to 150 PSI Relief Valves
• Onboard digital operating control
• Fully modulating with 5:1 turndown
• Stainless steel heat exchanger
• Natural Gas or LP Available
• Through wall exhaust vent (vertical/horizontal) with 3 air intakes:
o outside air sealed direct
o outside air
o indoor air
• Extremely low NOx
• Fail Safe high limit w/Manual reset
• Flow proving
• Direct spark ignition
• Zero clearance to combustibles
• Boiler Circulating pump
• Neutralizer Kit
• Many more standard features
• Several Optional features available such as Rack kits, and more
MicoFlame Series
MicoFlame is a residential / light commercial water heater / heating boiler. The MicoFlame is sealed combustion and fan assisted, delivering thermal efficiencies of up to 85% non-condensing or 95% condensing.
Standard Features
• Low NOx
• Copper Tube Heat Exchanger which meets lead-free regulations
• Durable metal fiber burner unaffected by high temps
• Suitable for use in negative pressure environments
• Complete diagnostic light package
• Easy access for inspection & cleaning of heat exchanger tubes
• Durable ceramic fiber refractory
• Simple to service with easy access to burner and fan
About Camus
Located beside Toronto Pearson Airport, we operate out of a modern manufacturing facility complete with a state-of-the-art testing lab, engineering department, manufacturing and assembly lines, warehouse and parts depot.
With over 75 years of collective experience, the CAMUS design team of engineers, service and management staff are equipped to lead the way with innovative designs and leading-edge technology. Every Camus boiler is factory tested before leaving our facility ensuring that quality, efficiency, serviceability and reliability are built into every product.
R.F. MacDonald Co. is available to immediately handle all Camus sales and service in California and Nevada. Contact your local rep.
