ITT Goulds Model 3196 Pump - R.F. MacDonald Co.

ITT Goulds Model 3196 Pump

ITT Goulds Pump Model 3196

Including the base model, HT model, & LF model

Goulds 3196 i-Frame

Model 3196 i-Frame

The Model 3196 Process Pump already sets the industry standard in remarkable performance and reliability, and adding i-Frame Power Ends only adds to its ability to satisfy your pumping needs in the most efficient way possible.

  • • Capacities up to 7,000 GPM
  • • Heads up to 730 feet TDH
  • • Pressures up to 375 PSIG

View Product Brochure

Goulds HT 3196

Model HT 3196 i-Frame

The Model HT 3196 i-Frame Pump is a specifically configured 3196 variant for superior performance for high temperature applications in the chemical industry.

• Capacities up to 4,500 GPM
• Temperatures up to 700 °F
• Heads up to 925 feet TDH

View Product Brochure

Goulds LF 3196

Model LF 3196 i-Frame

The Model LF 3196 i-Frame is a specifically configured 3196 variant for satisfying the low flow services of the Chemical Process Industries.

  • • Capacities up to 220 GPM
  • • Heads up to 925 feet TDH
  • • Pressures up to 450 PSIG

View Product Brochure

Goulds CV 3196

Model CV 3196 i-Frame

Goulds concentric volute casing with recessed open impeller provides non-clogging capability with minimal solids degradation. In addition, the CV 3196 handles liquids entrained with air or gas.

• Capacities up to 2,700 GPM
• Heads up to 440 feet TDH
• Pressures up to 285 PSIG

View Product Brochure


Using the Model 3196 Pumps

  • Refer to one of our pump experts here at R.F. MacDonald Co., and we’ll make sure you select the right pump model and size for you particular application and installation

  • There are three groups to choose from that operate in high pressure applications (i-Frame, LH-, and HT-)

  • Patented Taperbore ™ PLUS Seal Chamber and BigBore ™ Seal Chambers

  • Performs at a full 50/60 Hz coverage

  • Goulds offers a complete range of pump mounting systems to meet plant requirements; making installation and maintenance easier

  • Fully open impeller design

  • Simplifies maintenance by allowing the casing to remain in the piping during disassembly

  • 3196 — Chemical, petrochemical, pulp & paper, primary metals, food & beverage, and general industries

    HT 3196 — Hot water, thermal oils/heat transfer fluids, reactor heating, pilot plants, electronic heating & cooling, asphalt preheating, die/mold pre-heating systems, and urea

    LF 3196 — Specialty chemicals, batch chemical process, reactor feed, shower service, boiler feed, condensate, high pressure process, column reflux, column bottoms, hot oil, and seal water

    CV 3196 — Filter slurries, latex, polystyrene beads, crystal suspensions, screen rejects, hydropulper pump, sodium chlorate slurry, fruit and vegetable suspensions, dye liquor, fibrous wastewater, long fiber white water, and primary cleaner pump


Keywords: horizontal pumps, multiple variant pumps, low flow pumps, high temperature pumps, centrifugal pumps, end suction pumps,

ITT Goulds Pumps